ip6_bit.c

Go to the documentation of this file.

 
#include "ip.h"
#include "byte.h"
#include "str.h"
#include "fmt.h"
#include "stralloc.h"
#include "ip_bit.h"
 
#define BITSUBSTITUTION
 
/***
  /fn bytetohex
  /brief Convert a number of max 255 to hex.
  /param decimal The decimal number.
  /param hex The converted hex value.
*/
 
void bytetohex(unsigned char decimal, char hex[3]) 
{
  char* hexdigits = "0123456789ABCDEF";
  int rest, number;
  hex[0] = '0';
  hex[1] = '0';
  hex[2] = '\0';
 
  number = decimal / 16;
  rest = decimal % 16;
 
  hex[0] = hexdigits[number];
  hex[1] = hexdigits[rest];
}
 
static char strnum[FMT_ULONG];
 
/***
  /fn ip6_bitstring
  /brief This function converts a IPv6 address into its binary representation.
  /param out: ip6string   The destination address.
  /param in:  ip6addr           The source address.
  /param in:  prefix        The net prefix bits (maximum 128 bits for IPv6).
  /return -1: lack of memory;  1: non valid IPv6 address; 0: successful converted.
*/
 
int ip6_bitstring(stralloc *ip6string, char *ip6addr, unsigned int prefix) 
{
  char ip6[16];
  int bit, octettbitpos, number, shiftedvalue;
  int i, slashpos, ip6len;
 
#ifdef BITSUBSTITUTION
  char subvalueforbitone[1];
  subvalueforbitone[0] = 96;                    /* substitution starts from token '_' = 96 */
#endif 
    
  ip6len = str_len(ip6addr);
  slashpos = byte_chr(ip6addr,ip6len,'/');
  if (!stralloc_copyb(ip6string,ip6addr,slashpos)) return -1;
  ip6addr[slashpos] = '\0';
 
  if (!ip6_scan(ip6addr,ip6)) return 1;
  if (!stralloc_copys(ip6string,"")) return -1;
    
  for (i = 0; i < 16; i++) {   
    number = (unsigned char) ip6[i];
 
    for (octettbitpos = 7; octettbitpos >= 0; octettbitpos--) {
      shiftedvalue = 1 << octettbitpos;
      bit = number / shiftedvalue;
      number = number - bit * (shiftedvalue);
      
      if (bit) {
#ifdef BITSUBSTITUTION
        if (!stralloc_catb(ip6string,subvalueforbitone,1)) return -1;
        subvalueforbitone[0]++;
#else
        if (!stralloc_cats(ip6string,"1")) return -1;
#endif
      } else 
        if (!stralloc_cats(ip6string,"0")) return -1;
 
      prefix--;
      if (prefix == 0) return 0;
    }
  }
 
  return 1;
}
 
/***
  /fn bitstring_ip6
  /brief  This function converts a bit string which is produced by ip6_bitstring() 
          into an IPv6 address. The string may start with a '^'.
  /param in:  ip6string         Source string which need to be converted.
  /param out  ip6addr     0-terminated IPv6 destination address with net prefix.
  /return -1: No memory could allocated,0: Failure,1: Success.
*/
 
int bitstring_ip6(stralloc *ip6addr ,stralloc *ip6string) 
{
  int j = 0;
  int i = 0;
  int len, prefix, shiftedvalue; 
  int bitpos = 7;
  int decimalnumber = 0;
  char ip6[16] = {0}; 
  char ip6compact[40] = {0};
 
  if (!stralloc_copys(ip6addr,"")) return -1;
  prefix = ip6string->len - 1;
 
  if (prefix <= 0) return 1;
  if (prefix <= 1 || prefix > 128) return 1;
 
  if (ip6string->s[0] == '^') j = 1;
 
  for (i = j, j = 0; i <= prefix; i++) {
    if (ip6string->s[i] != '0') {
      shiftedvalue = 1 << bitpos;
      decimalnumber += shiftedvalue;
    }
    bitpos--;
    if (bitpos == -1) {                         /* Put each converted byte into the array. */
      if (j < 16) {
        ip6[j] = (unsigned char) decimalnumber;
        j++;
        bitpos = 7;
        decimalnumber = 0;
      }
    } 
  }
 
  if (bitpos < 7) {                             /* Last bit was read,but the number was not converted. */
    ip6[j] = (unsigned char) decimalnumber;
    j++;
  }
 
  len = ip6_fmt(ip6compact,ip6);
  if (!len) return 1;
 
  if (!stralloc_copyb(ip6addr,ip6compact,len)) return -1;
  if (!stralloc_cats(ip6addr,"/")) return -1;
  if (!stralloc_catb(ip6addr,strnum,fmt_ulong(strnum,prefix))) return -1;
  if (!stralloc_0(ip6addr)) return -1;
 
  return 0;
}
/***
  /fn ip6_fmt_str
  /brief This function expands any valid IPv6 address into its full format of 16 bytes.
         It returns the number of processed tokens on success.
  /param src            Source IPv6 address.
  /param destination    Expanded IPv6 address.
  /return -1: No memory could allocated; 1: failure, 0: success
*/
 
unsigned int ip6_fmt_str(stralloc *dest, char *src)
{
  stralloc addr = {0};
  char ip6[16];
  char hexvalue[3] = {0, 0, 0};
  int i;
 
  if (!stralloc_copys(&addr,src)) return -1;
  if (!stralloc_0(&addr)) return -1;
    
  if (ip6_scan(addr.s,ip6) == 0) return 1;
  if (!stralloc_copys(dest,"")) return -1;
 
  for (i = 0; i < 16; i++) {
    bytetohex((unsigned char)ip6[i],hexvalue);
    stralloc_catb(dest,hexvalue,2);
    if (!((i+1) % 2) && (i+1) < 16) 
      if (!stralloc_cats(dest,":")) return -1;      /*Append ':' after every two bytes.*/
  }
  return 0;
}